Silpoxy glue specially designed to repair prostheses hardens in 12 minutes.

With time your prosthesis (Emisil, Peecock, Mr. Limpy, Packer Gear, Gode ...) It's all right. Thanks to this glue fix it.

Capacity: 90 g

Use:

• Security: Use it in a properly ventilated place. Wear safety glasses, long sleeves and rubber gloves to minimize contamination.

• Store and use the product at room temperature 23 °C. This product has a limited lifetime and should be used as soon as possible. A clean and dry surface is essential to the success of collage.

• If possible, sand the surface and then apply a solvent wipe before applying. As there are not two identical applications, a small test is recommended.

• Press the tube, taking care not to let air enter the tube before placing the cap. The product not used in an air-exposed tube will dry quickly. Implementation

• Apply adhesive to surface and coupling parts. The material will start drying in 15 minutes. Parts can be handled after 1 hour. Complete collage is reached after 24 hours. Warmer temperatures (and higher humidity) will lead to faster hardening. A lower temperature will delay treatment.

Sil-PoxyTM is a single-component adhesive specially manufactured to repair silicone rubber and other substrates, including certain plastics (urethane), coatings/ceramics, fabrics, etc.

Sil-Poxy TM will work with tin or platinum-based silicones and provide a strong and flexible bond between high-elongation silicone parts. Can be coloured with Silc-PigTM silicone pigments. Hardened adhesive is resistant to weather, moisture, UV and high temperatures.